45NRTH's Nicotine is the first high performance mountain bike tire offering concave studs (sold separately). The high volume 2.35-inch casing profile adds float on packed snow while also adding a flatter contact patch for incredible traction and stability. The tread design of the Nicotine uses siping and open space between lugs to grip and shed snow. Add up to 222 lightweight studs with a concave carbide tip and aluminum base to provide extra assurance when the surface turns icy.
$120.00 - $220.00
Riding your fat bike on ice just got even better with the redesigned Dillinger tread pattern and tubeless compatibility. 252 carefully positioned studs allow you to rail icy off-camber singletrack with confidence and control, while taller side lugs bring improved cornering in snowy conditions. Dillinger’s center tread is tightly spaced for speed when you need it, so you can power up an icy climb and rip down the other side as the studs claw into the slick surface. - Braced side lugs for improved cornering - Tubeless-ready
$120.00 - $210.00
The extra width of the Dillinger 5 provides flotation over loose snow additional grip while turning, accelerating or braking on ice and packed snow. Available in both studded and non-studded configurations. The studded version comes with 258 concave, aluminum carbide tip studs to provide extra bite and increased durability
This item contains 10 replacement plugs for the Blackburn Plugger Tubeless tool (sold separately), a one-shot tire plugging system for tubeless tires. It deploys in seconds to give a permanent fix for your flat.
Those guys who said "Tubeless tires never get punctures"? They lied. The Blackburn Plugger Tubeless Tire Repar Kit is a quick, one-shot tire plugging system for tubeless tires. It deploys in seconds to give a permanent fix for your flat. Mount it to your frame, tape it to your top tube, or strap it to your ankle like a shark knife. Just keep it close and it'll get you out of trouble. Pronto. - Stores ten plugs. - 27g tool only 47g tool with strap
Challenge's Valve Extenders screw onto the end of Presta valves to make the valves 42mm longer so that the valves will protrude through wheels with tall rims far enough to be able to attach your pump and inflate the tires. You get two extenders and a wrench for them.
Challenge's S.C. Seamless Latex Cross Tube is hand made for the highest quality. Latex tubes are usually lighter and roll with less resistance than standard butyl tubes. They also resist punctures. The S.C. fits tires 28 to 35mm wide, and has a 47.5mm-long valve with a removable core.
Exploration is the order of the day with Clement's X'Plor MSO tires. Intended as a mixed conditions adventure tire, the MSO dares you to go where lesser tires fear to tread. Equally at home on gravel roads, trails, pavement, and urban adventure rides, the MSO tires feature a smooth, fast-rolling center tread to keep your speed high while the aggressive shoulder lugs provide great traction when the surface gets loose. Handling characteristics are enhanced by the lightweight, 120tpi casing, dual compound tread, folding bead, and supple sidewalls. A bead-to-bead layer of puncture protection adds some insurance when you decide to hit the trails.
Continental's Gatorskin is a super long-wearing and reliable tire that's fast and great handling, too. It features a supple 180-thread-per-inch casing, a bead-to-bead layer of DuraSkin, and a Kevlar-reinforced top layer. The result is a lightweight tire that rolls and corners with the best of them while providing flat protection and durability second to none.
The Copperhead Road is a supple tire for road bikes with greater clearance. - Ideal replacement tire for casual touring, road or pavement use - Clincher design - 33TPI
The MXP combines a unique tread pattern with our innovative tubeless ready design to provide an amazing all-conditions tubeless ready tire. It excels on grass, loose dirt, sand, moderate mud, hard pack and pavement. The MXP is named after the airport code for Milan, Italy, site of a World Cup cyclocross venue that calls for an all-conditions tire. The tread features a classic profile with several modern updates. Precise grooves in the central chevrons allow the tread to flex and more aggressive side knobs offer traction and control beyond what you might expect. If you could only have one cyclocross tire in your quiver, the MXP is the one to have. Size: - 700 x 33mm Weight: - 446 grams Type: - Tubeless Ready Part #: - D10042 Product Features: - Center chevrons and staggered side knobs for all-conditions. - Side knobs offer superior cornering. - Soft rubber compound provides extra grip and shock absorption. - Tubeless-ready design mounts easily to most tubeless ready rims. - Tubeless casing is reinforced for wear, features an Aramid bead. - Precision design creates a straight tire with no variances in size or alignment. - Can be used tubeless or with a tube.
- Urban Barrier puncture protection - All weather tread pattern wicks water away from key contact points - Shallow tread blocks create a low rolling resistance
Kenda's K-Rad is a true multitasker. Ride to the skatepark and bang off some moves, then hit the dirt jumps in the afternoon. Rock the vert ramp then session a street spot on it, the K-Rad is down. The inverted tread design gives you a fast, smooth ride on the street, without sacrificing anything when the pavement ends and you hit the dirt. The knurled tread and traction bars in between the knobs keep the tire from deforming, whether you're leaning into a turn on the street or railing the pump track.
Kenda's K-Rad is a true multi tasker. Ride to the skatepark and bang off a session, then hit the dirt jumps in the afternoon. Hit the vert ramps then do an urban assault on it, the K-Rad is down. The inverted tread design gives you a fast, smooth ride on the street, without sacrificing anything when the pavement ends and you hit the dirt. The knurled tread and traction bars in between the knobs keep the tire from deforming, whether you're leaning into a turn on the street or railing the pump track.
Multi-use designed tire — great for urban assault, street, or park riding and great as a dirt jumper. Found mainly on Kenda's K-Generation tires, SRC (Standard Rubber Compound) combines the best attributes of low rolling resistance, extreme durability, and tread longevity into one universal package that benefits riders of all disciplines. - Inverted tread design and knurled tread surface are low profile and fast rolling without sacrificing traction - Wire Bead with SRC compound - Front and rear application, best when used as a set - K905 Tread - For All-Around BMX
For hard-core riders who don't hang up their bikes when the flakes start flying, Kenda has the tire for you: the Klondike Skinny. Open, directional knobs give you stability and snow-shedding ability while 100 carbide studs bike into snow and ice for unbeatable traction. Great as a winter 'cross tire and as a winter commuter, the skinny width gives you good fork/frame clearance in packed snow. What's more is that as the tire wears, the studs retract as well, extending the life of the tires.
Maximum Grip This new All Mountain tire, developed with top Enduro riders, offers improved grip and propulsion as well as excellent braking thanks to its mix of three rubbers. The Race Compound sub-layer works in direct proportion with how hard you pedal, ensuring the utmost in performance. Its outer Traction Compound rubber provides for outstanding braking and maximum power without sacrificing propulsion. And its GRIP Compound, featuring bilateral rubbers, guarantees incredible grip so you can let yourself go while riding. Awaken your Senses: Thanks to its Trail Shield Technology, a strong and resilient mix of a 3x60 TPI carcass and a reinforced, high-density casing, the MICHELIN WILD AM is extra tough and durable and therefore perfect for trail and All Mountain riding. Label E-Bike Ready: For improved traction and safety: enhanced grip on dry and wet surfaces. And for increased durability and carrying heavier loads: strong and resilient carcasses.
$22.00 - $24.99
Hit the dirt jumps, flow the park and session the street, all on Maxxis' Holy Roller. The unique tread pattern makes this great tire super versatile for any type of riding.
$53.00 - $64.99
Semi-slick CX racing tire with aggressive cornering knobs. The Maxxis Speed Terrane features a familiar file tread pattern optimized for early-season cyclocross races. Micro-diamond knobs adorn the tread surface to offer blazing speed on hardpacked surfaces, while stacked paddle knobs down the middle offer unrivaled climbing and braking traction so you can attack whenever you like. When the course gets twisty, the siped and offset cornering knobs will dig in to give you the support to brake later and push your tires as hard as your legs. Worry less about your tires and more about the holeshot! - File tread design optimized for grass and hardpack - Aggressive cornering knobs - EXO Protection - Folding carbon bead - Tubeless Ready
Maxxis' Ikon, as the name suggests, is a tire other treads look up to. Great for everything from dry hardpack to loose, this light tire still gives you high-volume and a 2.2-inch width for hold-your-line control. This member of Maxxis' eXCeption Series of tires features a combination of a softer 62a compound and supple 120 TPI casing. This makes for a lighter model tire and enhances cornering, braking, and acceleration. Run it on the front, back, or both. - Folding bead - Weight: 480g (3C), 535g (3C EXO) - Recommended for race use only
Minion performance comes to fat bikes. The Maxxis Minion FBF represents a progression in fat-biking by offering a front-specific tire designed for trail riding. Featuring the proven Minion DHF tread blocks, the FBF combines extreme cornering capability, low rolling resistance, and fat-tire volume for unsurpassed grip on uneven and loose surfaces. - Inspired by the Minion DHF - Front-specific tread design - Dual compound - EXO Protection - Tubeless Ready
Minion performance comes to fat bikes. The Minion FBR is a rear-specific fat bike tire designed for trail riding. It shares the look of the Minion DHR II, but is optimized for fat biking. The Minion FBR features well-known, proven side knobs for cornering traction and ramped, paddle-like knobs down the middle, minimizing rolling resistance and maximizing traction in all conditions. - Inspired by the Minion DHR II - Rear-specific tread design - EXO Protection - Tubeless Ready
$38.99 - $79.90
- Just like the Original version except specially designed for FatBike applications - 2-ply rubber shield fits between tire and tube to prevent flats - Fits both 26-inch and 29-inch tires
- 6061 Aluminum valve and cap - Removable valve core - 4mm allen key slot for easy installation and removal - Comes with round & square rubber bases for different rim types - Spare alloy valve cap with integrated valve core removal tool
Odyssey's Air Supply tubes are specifically sized to fit modern BMX tires, and they are manufactured with a stronger emphasis on quality versus simply chasing the lowest possible price. On average, the Air Supply BMX tube retains air significantly longer than others currently available on the market. This is down to both the rubber that is used, and because of strict quality control during manufacturing. It is normal to assume that a “tube is a tube,” but a higher quality tube will always last longer than a cheap tube during comparable everyday use.
Based on the popular Path tire from the early 2000’s, The Path Pro has been fully redesigned to meet today’s riding styles. This includes a proprietary rubber compound that is both extra-grippy and long-lasting, bigger sizing options, and an all new tread pattern inspired by the original with a smooth center tread and knurled side blocks. Features: - Directional tread pattern with smooth center tread - Proprietary rubber compound - Improved grip & wear resistance - Micro-knurled side blocks Pressure Options: - High Pressure: 100 PSI / Dual-Ply Sidewall - Low Pressure: 35-65 PSI / Lighter, Single-Ply Sidewall NOTE: Yes, it squeaks.
The Pasela ProTire is available in a wide range of sizes. It incorporates ProTite technology for puncture protection and has two excellent all around tread patterns. A series renewal offering the same basic performance with enhanced puncture resistances. - Urban/Commuter tire - Steel (Wire) bead - 45-90 PSI
- Perfect for urban duty mountain bikes or 650b touring bikes - Fast enough for paved roads and strong enough for gravel - Folding Aramid bead
$45.99 - $49.99
Gravel road riding is all the rage at the moment. It's great for cyclists who want to leave sealed roads behind and enjoy the freedom of cycling on unpaved roads. Designed to suit diverse touring styles, the GravelKing uses a mixture of properties that also accommodate on-road cycling. Featuring ZSG Natural compound, anti-flat Casing, and Advanced Extra Alpha Cord. - Black multi-use gravel tread - Aramid (Kevlar) folding bead
These oversized Presta valve nuts are specifically designed to provide extra clearance and extra leverage to better tighten tubeless valves. They're especially helpful on single-wall rims. -Concave to allow better engagement of the valve/rim interface -Oversize to provide extra torque when tightening -Especially helpful on single-wall rim tubeless setups -CNC-machined AL-6061
Page 1 of 8 Next page