Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Accessories

XLAB Mini Bag
$19.95
Xlab's Mini Bag is a small seat bag perfect for carrying the essentials. Can fit a tube, tire levers, inflator, patch kit, and two 16-gram CO2 cartridges. Small enough to tuck under your saddle or inside your Super Wing or Carbon Wing rear carrier. It's made from tough Cordura, is easily attached with the hook-and-loop straps, and it works with round and aero seatposts.
Willworx Superstand Bike Stand
$39.90 - $59.99
- Shop quality bicycle display and storage stand - Graphite ripple powdercoat over steel construction - Four-Point, Foam rubber end-Cap feet - 2 Piece design disassembles for space-Efficient storage - Standard and extreme models feature welded base construction (Extreme model accepts up to 3 inch tires) - Retail model features flat-Packed, Bolt-Together base construction - Fat rack features flat-Packed, Bolt-Together base construction and will suit tires from 3.8" To 5" with three width positions, 4.25", 4.75" And 5.25"
Wald 582 Rear Folding Basket
$24.99 - $25.99
The Wald 582 sets the standard for ingenuity when it comes to rear baskets. Mounting to the side of many rear racks, this nimble basket is the perfect size for packing 1-2 bags of groceries while balancing your load. When not in use, the base of the basket pivots up allowing the side walls to collapse. A simple clamp at the top keeps the basket out of your way when not in use. Available in plated (582), black (582BL), and white (582WH) finishes. - Made in U.S.A. (Maysville, KY) - Baskets clamp to most rear racks up to 1/2" diameter - When not in use the base of the basket pivots up allowing the side walls to collapse making the collapsed basket 1" thick - A simple clamp at the top keeps the basket out of your way when collapsed - Extended basket is 12 3/4" front to back x 7 1/4" side to side x 8 1/2" deep - 582 Baskets have a Zinc Plated Finish; 582BL and 582WH Baskets have a Powder Coat Finish - Complete basket weighs 2.8 lbs.
Wald Wald Training Wheels 10252
$31.99
Wald's 10252 training wheels are designed to mount on most single speed bicycles with 16- to 20-inch wheels and are intended for use by riders weighing up to 100 pounds. These training wheels feature new frame adapters that improve installation. The new frame adapters enable this wheel set to be mounted on bicycles with .75 and 1.00-inch rear frame tubes. The training wheels can also be mounted onto bicycles with 1.25-inch rear frame tubes when the frame adapters are not used.
Wald Wald Training Wheels 1216
$28.99
Wald's 1216 training wheels are designed to mount on most single speed bicycles with 12- to 16-inch wheels. This model is intended for use by riders weighing up to 75 pounds.
Wald Wald Training Wheels 742
$34.99
Wald's 742 training wheels feature three slots on the brace arm allowing this wheel set to mount on most single speed bicycles with 16- to 26-inch wheels. The brace arms are designed to fit rear frames tubes up to .75 inches in diameter. This model is intended for use by riders weighing up to 125 pounds.
Wahoo KICKR CLIMB Indoor Grade Simulator
$599.99
The latest innovation from Wahoo will literally take your indoor training to the next level! KICKR CLIMB indoor grade simulator is designed to work exclusively with the Wahoo KICKR Smart Trainers and when paired, it will add physical grade changes to your indoor training. The KICKR CLIMB is compatible with Third Party Apps, so whether riding a virtual course or performing a structured workout, KICKR CLIMB blends ascents and descents with resistance changes for a truly immersive indoor training experience. The world isn’t flat; now, neither is your ride! Features - Real-time grade changes - App controlled - 20% maximum incline - -10% maximum decline - KICKR smart trainer compatible - KICKR desk compatible - Wahoo ELEMNT bike computer compatible - Direct proximity pairing - Locked and unlocked climbing modes - Manual grade adjustments with remote control - Quick release and thru-axle bike compatibility - LED indicator lights - Professional grade durability - Third party app compatibility
Wahoo KICKR SNAP Smart Trainer
$499.99
The Wahoo KICKR SNAP makes indoor training a "snap!" It's a convenient, easy to set-up wheel-on smart trainer with the realistic ride experience Wahoo smart trainers are known for. The SNAP's legendary flywheel features technology that creates the same resistance experienced when riding outdoors. Plus, no other indoor bike trainer has more software training options, including Zwift and Trainer Road. The KICKR SNAP includes LED lights for connection status, third party power meter support, and the power measurement is now accurate up to +/-3%. - Designed for consistent power measurement of up to 1500W and accuracy of +/- 3% so that you can monitor and adjust your intensity. - Visual confirmation that KICKR SNAP is powered, connected and transmitting via Bluetooth Smart and/or ANT+ - Wahoo's KICKR CLIMB indoor grade simulator was designed in conjunction with the KICKR smart trainers to deliver an unmatched indoor training experience when combined. - KICKR HEADWIND was designed to deliver innovative climate control to your indoor training experience. - ANT+ and Bluetooth capabilities allow it to connect to both smartphones and GPS devices simultaneously or separately. An ANT+ FE-C connection allows the KICKR to be controlled from any FE-C enabled device or application. - SNAP's wheel-on design makes it easy to turn your road, mountain, or TT bike into a powerful indoor smart trainer. - Made from high strength carbon steel and featuring a wide stance, SNAP is designed to keep its feet firmly planted on the floor and your bike securely locked in so you can train with confidence. - When connected to your device, it automatically sets your resistance via your favorite app or software - The SNAP flywheel is innovative and proven technology emulates the power and inertia experienced during outdoor riding. It provides the most realistic ride feel especially when using virtual riding/training platforms like Zwift and Trainer Road. - Get vital cycling metrics on your indoor ride. - Low operating sound, so no shouting required! - Works with popular training apps such as Zwift, The Sufferfest, Fulgaz and TrainerRoad. - Compatible with a third party power meter.
Wahoo RFLKT Bike Computer
$99.00
Wahoo's RFLKT harnesses the power of your phone into a sleek cycling computer. The RFLKT wirelessly "reflects" data from your preferred cycling app, so you can view it right on your handlebars while your phone is safely tucked in your jersey pocket. Using the buttons on the side of the RFLKT, you can control your favorite app on your phone. • BLUETOOTH 4.0: BLE capabilities allow for a wireless connection to smartphones • WIRELESS CONNECTION: No tangled wires on your bike to connect the bike computer to your device. • PROTECT YOUR PHONE: Keep your phone safe in your jersey pocket and get data from your favorite cycling apps reflected on your handlebars • FULLY CUSTOMIZABLE SCREENS: Choose what data you want to see during your ride, including GPS and cycling sensor data • CONTROL APP FUNCTIONALITY: Use buttons on the side of the unit to control music playback and other app functionality • THREE MOUNTING OPTIONS: Stem, bar, and quarter turn mount options to fit your cycling needs
Wahoo RPM Cadence Sensor (BT/ANT+)
$39.99
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes
Wahoo RPM Speed Sensor (BT/ANT+)
$39.99
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes
Wahoo RPM Speed/Cadence Sensor Combo Pack (BT/ANT+)
$69.99
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes
Vittoria Pit Stop Tire Sealant
$10.99 - $14.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
TwoFish Twofish Flashlight Holder
$7.99
- Mounts most AA flashlights to handlebars and helmets - Ideal low-cost lighting alternative for cyclists
TwoFish Vinyl Coated Growler Quick Cage
$38.95
- Stainless steel cage with a black vinyl coating - 5" Outer diameter cage velcros on any size frame tube or seat post - Will not scratch metal bottles or remove paint - Not recommended for glass - Proudly made in chicago, Illinois
Topeak DeFender FX 279er
$19.99
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - QR fork attachment fits 19.6mm/26mm/27.7mm/35mm steerer tube - Two tone injected high impact resistant plastic - Weight: 233 grams - Rear angle adjustable - 73x21x11cm/28.7x8.3x4.3-inch
Topeak DeFender RX 279er
$18.95
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender RX 279er fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - Clamp Diameter: Universal, endless strap type - Quick release allows DeFender to be installed and removed in seconds - Rear angle adjustable - Injected molded nylon - Dimensions (L x W x H): 22 x 4 x 6" - Weight: 226 grams
Topeak DuoBand Speed & Cadence Sensor
$67.99
Topeak's DuoBand Speed and Cadence Sensor is low profile and angle adjustable for an integrated look and ease of installation. It’s compatible with the latest devices using BLE4.0 and ANT+ technologies and indicators for power, low battery and sensor detection. - Bluetooth Smart & ANT+ super low energy technology - Battery Life: 900 hr - Transmission Range: < 5 meter (16.4 ft) - Power / low battery indicator / speed sensor sensing indicator - Battery: CR2032 x 1 (included) - Waterproof: IPX 7 - Mount: Chainstay - Size: 6.5 x 2.9 x 1.7 cm/2.6” x1.1” x 0.7”
Topeak Explorer Tubular Rack w/Disc Mounts
$49.99
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes with disc brakes, and has a center strip that acts like a short fender, too.
Topeak Explorer Tubular Rack w/Disc Mounts and Spring
$55.99
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes with disc brakes, and has a center strip that acts like a short fender, too. Plus, it comes with a spring that folds up to clamp securely onto books, magazines and other thin objects.
Topeak MTX TrunkBag DXP
$125.99
Topeak's MTX TrunkBag DXP boasts a pop-up main compartment and expandable side panniers so it's capable of carrying plenty of gear. Plus it's built to last with rigid molded panels mated to 600-denier nylon. And, it's packed with handy features, such as a shoulder strap, carrying handle, bottle holder, taillight clip and top elastic straps. There are even reflective strips for safety. And, Topeak's ingenious MTX System makes it a snap to attach it to your Topeak MTX QuickTrack rack (sold separately).
Topeak MTX TrunkBag EX
$69.99
MTX QuickTrack compatible TrunkBag featuring a divided main compartment constructed with Topeak's unique process of combining rigid panels and flexible fabric for structure and water repellency. Features two mesh side compartments for extra capacity and rear water bottle holder lets you carry more water on extended trips. - Attachments: 1 divided main compartment, two mesh side pockets - Capacity: 8L / 480 ci - Added Features: Water bottle holder Shoulder strap Carrying handle Elastic top bungees 3M reflective strip Safety light clip Optional rain cover - Size (L x W x H): 35 x 21 x 19 cm / 14.2” x 8.3” x 7.5” - Weight: 870 g / 1.92 lb
Topeak Mini 6
$11.95
Topeak's Mini 6 is a great way to take along the essentials in a tidy and super-light package! Its forged-aluminum body includes: 2, 3, 4, 5 and 6mm Allen wrenches, and a Phillips screwdriver.
Topeak Modula Java Cage
$15.95
Topeak's Modula Java Cage carries your 12 or 16 ounce coffee cup with ease, so you can bring your favorite hot beverage along for the ride. It grabs securely with a rubber strap and adjusts to fit most insulated mugs.
Topeak Mounting Bracket Arm
$9.99
For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.
Topeak Omni RideCase DX
$54.99
The DX version of the Omni RideCase holds tight and works with almost every smartphone having a 4.5” to 5.5” screen, with or without a case. High quality, ultra-elastic silicone grippers tenaciously hold your phone for convenient display. The included RideCase Mount rotates for portrait or landscape orientation. The Omni RideCase is compatible with other RideCase QuickClick mounts, like the RideCase CarMount or RideCase Armband. - Material: Ultra-elastic silicone/engineering grade plastic - Added Features: Angle adjustable Rotates for landscape or portrait viewing - Included mounts compatible with Topeak RideCase & PanoComp X - Mount: Included mounts for installation on handlebar, stem or stem cap - Weight: 26 grams - Size: 13.1 x 6.9 x 1.7 cm / 5.2” x 2.7” x 0.7” (Case)
Topeak PanoComputer
$99.99
Slip Topeak's PanoComputer into its handlebar mount, and all the data you could want is at your fingertips. Once the ride is over, you can quickly and easily transfer that data to your smartphone to share with friends. The single, large button scrolls through all the computers 17 functions, which are shown clearly on the 2.3-inch screen, and it can store info from two bikes so you can swap it. Don't worry about rain, because the PanoComputer is water resistant.
Topeak RX TrunkBag DXP
$74.99
Topeak's RX TrunkBag DXP boasts a pop-up main compartment and expandable side panniers so it's capable of carrying plenty of gear. It's built to last with rigid molded panels mated to 600-denier polyester. And, it's packed with handy features, such as a shoulder strap, carrying handle, taillight clip and top elastic straps. There are even reflective strips for safety. Plus, Topeak's ingenious RX System makes it a snap to attach it to your Topeak RX QuickTrack rack (sold separately).
Topeak RX TrunkBag EX
$62.99
Topeak's RX TrunkBag EX is the ideal add-on for carrying your gear. It's built to last with rigid molded panels mated to 600-denier polyester. And, it's packed with handy features, such as a shoulder strap, carrying handle, taillight clip and top elastic straps. There are even reflective strips for safety. And, Topeak's ingenious RX System makes it a snap to attach it to your Topeak RX QuickTrack rack (sold separately).
Topeak SmartGauge D2
$37.99
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.
Page 1 of 14 Next page