Lubes/Cleaners
$6.95 - $17.95
Wolf Tooth WT-1 Chain Lube is a synthetic lubricant and a chain treatment in the same bottle. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes. As a chain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away. It will also protect your chain in all riding conditions, and allow you to ride longer between applications.
- Cleans, lubricates, and protects chains
- Peak performance in all conditions, wet and dry
- Also works on other places of your bike, including hubs, cables, and jockey wheels
$11.99
- For all TRP and Tektro hydraulic braking systems
- Non-corrosive mineral oil
- Increased Boiling point to 270 degrees C
- Decreased viscosity for better fluid flow
$16.30
E-Bike Chain Wax uses the same proven and trusted, biodegradable wax/water emulsion technology as normal Squirt Chain Lube and is fortified with specialized high-pressure friction modifiers.
- Slightly more slick than the original chain lube as this enables E-Bike Chain Wax to handle higher torque pressure and last longer in wet riding conditions than other wax based lubricants
- Does not attract dirt or grime to your chain and no degreasing is required or recommended
- 100% biodegradable
$25.00
The Ultimate Wear Reducing lubricant for E-Bikes. Based on our own award winning Synergetic lubricant, the first and only wet lube to record a 0.0% wear block in Zero Friction Cycling lab testing, Synerg-E takes our patent pending Tungsten Tribofilm Technology and blends it into a higher viscosity lubricant optimized for the high torque experienced in E-Bike drivetrains.
E-bike chains experience more than 2X the internal pressures of traditional bike chain, and are capable of wearing out expensive drivetrain components like chains, chainrings, and cassettes at more than twice the rate of traditional bicycles. By increasing viscosity and adding Calcium Sulfonate to the mix, Synerg-E gives up roughly 1 watt of pure efficiency to Synergetic, while nearly doubling the oil film strength to ensure the lowest rates of chain and drivetrain wear of any lubricant currently available.
As with all SILCA lubricants, Synerg-E uses only the finest, environmentally friendly pure synthetic base oils with additives approved as safe by the EPA and Bureau of Land Management. Synerg-E contains NO PFAS or other Fluorinated chemicals.
$25.00
SILCA Synergetic oil has tested internally to be the fastest and quietest oil-based lubricant ever tested, losing only 4.9 watts on 250 input (98.1% efficiency), however, it really begins to shine when focusing on longevity and durability of the chain and mating components. Best of all, because the lubricant forms a durable tribofilm at the metal surface, and is strongly attracted to itself, the lube proves to be exceptionally waterproof, remaining inside the chain even in testing under full water submersion, the lubricant is not displaced!
- 2oz Squeeze bottle with 18ga. Luer Lock Precision Applicator Tip
- 12,000+ miles of lubricant per bottle
- Ultra-high wearing, ultra-quiet, ultra waterproof wet lube
- For best results apply to clean/dry chain. For good results may apply to new factory-lubed chain and will fully displace the factory lube within 4-5 applications
$30.00
Your everyday cleaning solution. Spray onto your frame and clean mild dirt while leaving a ceramic coating to reduce future dirt and debris from sticking to the frame. Buff to a finish.
- Encapsulates light dirt and removes from surface
- Leaves a traditional ceramic coating behind
- Pina Colada Scent
- 16oz spray bottle
- Perfect for daily cleaning
$11.00 - $40.00
Shimano Hydraulic Disc Brake Fluid
- Non-corrosive mineral oil that offers excellent heat expansion properties
- Mineral oil will not absorb water from the air
- Not caustic and is non-toxic
$11.00 - $43.00
SRAM's Butter Grease is a Slickoleum lube recommended for fork bushings, Roam and Rise wheel rear hub pawls and Reverb seat post service. Keep your parts working smoothly!
$19.99
An oil change should be annually carried out or at least every 5000km. Through this process, it can be safe to say that there will always be enough oil in the hub regardless of oil loss (due to sweat oil) and that any penetrated water will be rinsed out.
For a problem-free oil change, we recommend the use of the Rohloff Oil Change Kit.
- Cleaning oil to be used prior to changing all-weather oil on Rohloff Speedhubs
- Oil change kit (RH-8410) includes: nipple-to-hub interface, filler tube, injection syringe, cleaning oil, and all-weather oil (25ml ea)
- RH8404 is lubricating and cleaning oil only
$49.00
- 50 hour service kit for Deluxe and Super Deluxe rear shocks
- Includes air can seals, piston seal, and glide rings
$5.00 - $24.00
Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.
$5.00 - $38.00
RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.
$6.99
- Makes braking and shifting super smooth by reducing the drag in cable housings
- Law prohibits ORM-D materials from shipping by air
$9.00 - $31.90
- 3-In-1 Bio-degreaser, hand cleaner, and stain remover
- 100% Natural, no citrus, palmas or petroleum
$16.00 - $64.00
- Makes your bike shine like new and keeps it that way.
- Biodegradable formula cleans, polishes, and protects in one step.
- Also great for dropper posts, suspension, and for seating tire beads.
The original bike polish, Bike Lust's proprietary silicone-based formula includes a biodegradable cleaning agent. Bike lust goes on wet, quickly cleaning light dirt and grime as it polishes, and then dries to a beautiful protective coating. Works on any surface or material in one simple step making your bike look like new and future cleaning easier! Also great for dropper posts, suspension, and for seating tire beads.
Bike Lust can be used on all types of materials and finishes including carbon fiber and matte finishes. It's also fantastic on tires to help shed mud and dirt as you ride.
$9.95
Park's Anti-Seize Compound reduces friction in threaded and press fit connections for easy assembly and disassembly. It's ideal for bottom brackets, pedal threads, headset cups, seatposts, quill stems and much more. This compound also seals and protects parts from corrosion and rust under the most extreme conditions.
$13.95
HPG-1 Park Tool High Performance Grease is proprietarily blended to meet the demanding needs of today’s high performance bicycles and high end components.
-Superior adherence and extended lubrication life
-Extreme temperature range: -20°F to 540°F (-29°C to 282°C)
-Highly water resistant
-Perfect for high end applications including precision ground and ceramic bearings, pivots and suspension components
4-ounce (113 g) tube
$28.95
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.
$9.95
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.
$12.95
Park's SuperGrip Carbon Assembly Compound is a combination of grease and tiny particles and is ideal for lubricating, protecting and tightening carbon components, like seatposts, handlebars and stems. SuperGrip solves the problem of carbon parts moving and slipping, which can happen if they are not lubed, or you apply standard grease or lube to them. It also works well with aluminum and steel components.
$10.99
- Developed to perform in the coldest of environment
- Tested to -50C, 5X lower than what would freeze a regular lubricant
$8.99 - $16.99
Developed in collaboration with a premium OEM component manufacturer. Maxima Mineral Brake Oil is designed to ensure fast and safe brake response at the most critical moments. A mineral-based formula does not damage painted surfaces or carbon fiber. Low maintenance formula does not absorb moisture like DOT fluids, delivering a high boil point and minimizing the frequency of system bleeds. Zero-fade performance provides the ultimate braking control under power.
For use in mineral-based brake and hydraulic systems specifying mineral oils.
Features:
- Consistent lever feel.
- Low maintenance.
- Lubricates and conditions seals.
- Minimizes system bleeding.
- OEM green coloring.
- Maintains High boiling point.
$8.99 - $14.99
High-performance brake and clutch fluid designed to lubricate and protect critical brake system componentry while providing reliable stopping power. Anti-vapor lock formulation maintains responsiveness and performance by fighting both water contamination and vaporization. Advanced chemistry resists corrosion, and oxidation and is compatible with SBR, EPDM, and natural rubbers. Exceeds the requirements of US FMVSS 116 DOT 5.1, DOT 3 & DOT 4, SAE J1703, SAE J1704, and ISO 4925 (Classes 3, 4 and 5.1).
For use in all hydraulic clutch systems and all brake systems specifying DOT 5.1 brake fluids. Do not use in DOT 5 silicone brake systems or mix with silicone-based fluids.
Features:
- For use in all vehicles specifying DOT 5.1 brake fluid.
- Durable and reliable stopping power.
- Anti-vapor lock formulation maintains a responsive lever and pedal feel.
- Resists corrosion, oxidation, and boil-off.
- Mixes with other DOT 3, DOT 4, and DOT 5.1 brake fluids.
- Exceeds US FMVSS 116 DOT 5.1, DOT 3 & DOT 4, SAE J1703, J1704 and ISO 4925 (Classes 3, 4 and 5.1).
$13.99 - $61.00
Royal Blood mineral oil is a specially formulated, low viscosity hydraulic fluid that ensures consistent performance of Magura brakes.
- Doesn't absorb water
- Lubricates entire braking system
$10.99
Designed to leave zero residue after application, Finish Line’s Bicycle Disc Brake Cleaner displaces any moisture built up on the pad or rotor, resulting in improved and predictable braking, and reduced brake squeal. With the unique characteristic of being acetone free, Finish Line’s Bicycle Disc Brake Cleaner is strong enough to clean the dirtiest rotors, yet safe enough to use around paint, carbon fiber and plastic parts.
- Engineered to rapidly clean disc brake rotors and pads
- Acetone-free formula
$9.99 - $34.95
Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.
$9.99 - $24.99
- The factory standard grease for leading bike and bearing manufacturers that exceeds the unique and demanding requirements of bicycle bearings
- Prevents wear and distortion in headsets, hubs, and bottom brackets
$12.99
Finish Line's Super Bike Wash quickly cleans dirt, clay, road grime and chain gunk off your bike. Five different cleaning agents work together to create a high-speed cleaning system. Three different rust and oxidation inhibitors protect metal surfaces to prevent rusting. It's safe for all bike surfaces.
$2.50
Specially formulated low-friction lubricant for the seals and bushings of the air chamber for front and rear Fox Racing Shox. Float Fluid is the recommended lube for use with Fox forks and shocks.
- Use when rebuilding Fox suspension to lubricate foam rings and seals
- Corrosion inhibitor
$20.00
5 Weight Damper Fluid
For rebuild and repair of Fox suspension.
Page 1 of 2
Next page